Kyria High Profile 25 and 45 degree tent with(45* version only) and without wrist rest holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Many people asked so I added a 25 degree version. These are both for the high profile Kyria case. I would use supports…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Many people asked so I added a 25 degree version. These are both for the high profile Kyria case. I would use supports when printing the 25 degree version.
I prefer a steep tent for Keyboards. This is 45 degrees. There are 2 sets of stl's. One with holders for the wrist rest and one without since I know not everyone will use them. I printed with 20% infill for some added weight. It took 19 hours per side with these settings.
These are the wrist rests I used: https://www.amazon.com/gp/product/B07F7Y1LRL/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
20
Post-Printing
I added grip tape to the bottom so it wouldn't slip on my XXL deskmat.

Category: Electronics