1 / 11
Ceiling Solder Fume Extractor Fan Adaptor 250mm Clipsal AirFlow CE250 — image 1
1 / 11

Ceiling Solder Fume Extractor Fan Adaptor 250mm Clipsal AirFlow CE250

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ceiling Solder Fume Extractor Fan Adaptor 250mm Clipsal AirFlow CE250

Rating
0 / 5
Likes
14
Downloads
39
Makes
0
Views
801
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Migrating from thingiverse

https://www.thingiverse.com/thing:4387788

 

Adapter to connect a removable 150mm flexible duck to a 250mm Ceiling Extractor to remove Solder / Flux fume.

designed to be printed on a CR-10S PRO , so a 300X300 bed size

because of the size of the BaseCoverRetainer , i had to break it into 2 to fit on the bed, then glue those to the Base directly.

also design WallRetainer to hold the Base directly, since i was not sure if the superglue would be strong enough. Can't be too careful...
using 4 X Wall Retainer, but you can also not use them, or use more of them...

wing 4G 9mm Sheet Metal screws to the airflow plastic Grille

Ceiling can is a Clipsal AirFlow CE250
https://www.clipsal.com/products/detail?CatNo=CE250

initially designed to have a 5 - 6 mm Rubber EPDM Sponge to improve the seal, but the seal was very good as is, so i did not put any rubber seal between the base and 150mm adapter. using the Hook-1.5mm

make sure the Hook are laid flat on the bed to increase strength.
Hook are using M3 X 10mm screws. Base already have pre threaded M3 holes

150mm flexible PCV Duct used
https://www.bunnings.com.au/blauberg-150mm-x-5m-pvc-duct_p4420308

anti draft / Backdraft stopper adapter for it it live (31/05/2020)

https://www.thingiverse.com/thing:4411669

https://www.printables.com/model/241775-ceiling-extractor-fan-anti-draft-backdraft-stopper

will also design a 150mm to 75mm adapter for the flexible smoke exhaust pipe when i get it
https://www.aliexpress.com/item/4000044513445.html

Flexible Fume Exhaust Bamboo Pipe OD75 ID68 Bracket and 150mm Duct Adapter is live (20/08/2020)

https://www.thingiverse.com/thing:4574749

https://www.printables.com/model/241776-flexible-fume-exhaust-bamboo-pipe-od75-id68-bracke

FreeCAD design files included,
Fastener workbench required.

 

Tags