1 / 6
DigiPi Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick case for the digipi.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 65
- Makes
- 0
- Views
- 1,146
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
First ever case for the digipi. This is a work in progress and I am open to ideas for changes. This case was made for the audio injector board with room for a PTT circuit.
All holes are for M3 screws and designed to be self tapped by driving the screw in to allow it to cut its own threads.
Connector used is a RC servo style or JST SM 5 Pin connector. Only using 4 pins, just using 5 for alignment.
Printed at .3mm layer height at 100mm/s Because I was prototyping.
Would be really nice at a smaller layer height and slower speed.
Didn't need any supports