Rack Mount Adapter for Mean Well ELP-75-5-C power supply for modular 19" 2U system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mounting bracket can be used to mount a Mean Well ELP-75-5-C 75 Watt power supply in one slot of the 2U rack…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 675
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This mounting bracket can be used to mount a Mean Well ELP-75-5-C 75 Watt power supply in one slot of the 2U rack mount system described by Krapozok (https://www.thingiverse.com/thing:1793758).
The ELP-75-5-C is the same as the ELP-75-5 but with a protective cover, so it is advisable to use the -C version.
The mount has a front plate that allows for good ventilation and a slot that can be used as a strain relieve for the power cord.
The following hardware is needed:
2 M3x10mm screws to mount the front panel to the mount
4 M3x6mm screws to mount the power supply to the mounting bracket
1 M3x8mm countersunk screw and M3 nut to mount the power supply to the frame of the rack mount
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
50%
Filament: DasFilament HIPS Black
Notes:
Use a filament material like ABS, HIPS or similar that is stable at the temperature produced by the power supply on its metal shield.
Category: DIY