Hoseadapter for Lechuza
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.33 – €0.40 net (excluding VAT)
For file: lechuza_adapter_0.1mm_PETG_MK3S_33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.37 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 32.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Lechuza to Gardena MicroDrip Adapter
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 78
- Makes
- 1
- Views
- 588
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Introduction:
I needed a water drainage system into the gutter for my Lechuza balcony planters. Since there is nothing to buy for this I have constructed an adapter for the hose from Gardena MicroDrip System.
Slicing
I parameterized the hose connection with 80% infill and Honeycomb pattern. The thread insert with 60% infill and also Honeycomb. The remaining part with 15% Infill Gyroid.
I recommend in any case to print the hose connection with a high infill because otherwise it breaks off quickly.
Other
Since it is for outdoor use and requires a certain material hardness I printed it with PETG and a layer height of 0.1.
Please print with thread down and support.
As a seal, I printed a ring of TPU.
This is a modification with better stability and assembling corners from: