Kenu iphone car clamp finger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement TPU finger for ones lost from a Kenu iphone car vent clamp. My clamp lost two of the four rubber fingers…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 469
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A replacement TPU finger for ones lost from a Kenu iphone car vent clamp.
My clamp lost two of the four rubber fingers covering the metal spines that are inserted into a car vent vanes. I decided to attempt creating two new ones as although the clamp still held fairly well in the vent, it was scratching the vanes.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: filaments.ca TPU black
Notes:
Take care to use TPU print settings (no retraction, max 15mm/s movement). I also heeded some advice to use a coating of glue stick on my smooth PEI sheet to allow the completed print to be removed more easily.
No supports are needed to print.How I Designed This
Measured one of the remaining spine covers with calipers, and created a duplicate in Fusion 360.
Category: Replacement Parts