FlexRadio Maestro hinged feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hinged feet for FlexRadio Maestro controller.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 55
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Remix of G6HOQ hinged feet for FlexRadio Maestro controller. OnShape used to build models from the original STL files. Added extra cross section to bracket and feet to stiffen the parts and reduce flexing. Added 2mm deep by 26mm diameter recesses to the feet to allow placement of a 3mm thick 25.4 mm diameter TPU anti-slip pad. Printed in PTEG, 20% infill, 3 perimeters. Use supports only on the bottom of the feet and the hinge brackets. Use 4 each 4mm diameter 0.7mm pitch, 8mm long screws to mount hinge brackets. Use 60mm long, 5mm diameter screw to connect brackets to feet. Use a washer and a nylon lock nut on the feet to hinge screw and adjust for the desired amount of friction. Have fun! 73, N1CL