HDMI plug support for Pioneer SC-2024/SC-1224 AV Receiver
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AFAIK this only can be used with the Pioneer SC-2024/SC-1224 AV Receivers and not with any other model.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 371
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
I made this model, to support the HDMI plugs connected to my Pioneer SC-2024 AV Receiver, so that they don't drag down the HDMI ports all the time which could cause contact issues.
I printed it with black PLAplus with a layer height of 0.3mm, 4 walls, 5 top and 5 bottom layers, a 0.4mm Nozzle and line widths as follows: walls: 0.5mm, infill: 0.6mm everything else: 0.4mm.
To install it, you have to unplug all HDMI plugs from the Pioneer SC-2024/SC-1224, then unscrew 3 screws from the metal cover, put the HDMI support in place, screw in the screws again (carefully - don't overtighten them) and plug the HDMI plugs back in.
All brandnames and trademarks are trademarks or registered trademarks of their respective owners.