HDMI plug support for Pioneer SC-2024/SC-1224 AV Receiver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AFAIK this only can be used with the Pioneer SC-2024/SC-1224 AV Receivers and not with any other model.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this model, to support the HDMI plugs connected to my Pioneer SC-2024 AV Receiver, so that they don't drag down the HDMI ports all the time which could cause contact issues.
I printed it with black PLAplus with a layer height of 0.3mm, 4 walls, 5 top and 5 bottom layers, a 0.4mm Nozzle and line widths as follows: walls: 0.5mm, infill: 0.6mm everything else: 0.4mm.
To install it, you have to unplug all HDMI plugs from the Pioneer SC-2024/SC-1224, then unscrew 3 screws from the metal cover, put the HDMI support in place, screw in the screws again (carefully - don't overtighten them) and plug the HDMI plugs back in.
All brandnames and trademarks are trademarks or registered trademarks of their respective owners.