Adaptateur tuyau évacuation climatisation Beko BA212C
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.33 – €0.41 net (excluding VAT)
For file: clim fixation v3_0.2mm_PETG_MK3S_28m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.37 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 27.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adaptateur permettant d'utiliser le réducteur fourni avec la climatisation pour l'évacuation en diamètre 125mm.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 1,346
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Le climatiseur BA212C de Beko possède un adaptateur en sortie d'appareil sur lequel il faut brancher un tuyau d'évacuation.
Pour pouvoir utiliser un autre tuyau de taille 125mm, il faut utiliser un adaptateur.
Les 2 adaptateurs doivent être reliés entre eux avec le tuyau d'évacuation.
L'adaptateur proposé permet d'éviter d'utiliser le tuyau d'origine en reliant les 2 adaptateurs (machine et réducteur) entre eux.
Imprimé en PETG pour supporter la chaleur de l'évacuation d'air chaud.
Infil : 15%
Supports : oui
Edit du 29/07/2022 :
Lorsque la climatisation à été utilisée depuis un certain temps, le PETG devient légèrement "flexible" et l'adaptateur se déconnecte.
- clim fixation v3.stl à imprimer en minimum 3 exemplaires (voire plus si vous souhaitez une accroche plus solide).
- cercle fixation v2.stl à imprimer en 2 exemplaires pour tenir en place les fixations.