Railblaza Mount with Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount with clip for the Railblaza brand hardware.
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 373
- Makes
- 0
- Views
- 2,014
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
This is a mount with clip for the Railblaza brand hardware.
Mount and clip to be printed separately.
Mount will also work with original clip.
Clip was printed at 100% infill.
Mount was printed at 60% infill.
you may have to cut to separate the clip joint, as tolerances are tight.
You may need to use pliers or leverage to snap the clip joint back in place when installing in the mount.
Floor was extended by about 3mm to allow for more meat at the bolt and nut fastener.
Hole for nut was extruded in the shape of the nut to fit better.
Installing the clip:
https://www.youtube.com/watch?v=gy5QgOfyNZg