1 / 5
Credit Card Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a locking case that holds 6 credit cards.
- Rating
- 4.667 / 5
- Likes
- 51
- Downloads
- 242
- Makes
- 3
- Views
- 2,185
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This case utilizes a slide lock that secures the credit cards within the case. The slide is pushed upward to unlock and then the case is pivoted to the side to open. The cards will then be splayed for selection.
Print Settings:
The model was printed in PLA at .2 mm resolution.
The model can be printed using slicer supports or printed with the designed-in supports.
Assembly:
- Slide the case into the Outer Case until the pivot pin seats into the pivot hole. The outer case can flex enough to allow the assembly.
- Slide the Slide Lock into position until guide and lock pins engage slots. There is enough flex in the case and lock to allow the assembly.