1 / 3
Belt Guide for Belt Tensioner for 40 Series Aluminum Extrusion — image 1
1 / 3

Belt Guide for Belt Tensioner for 40 Series Aluminum Extrusion

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a remix of the Belt Guide for Belt Tensioner (Sparco) by darumble.

Rating
0 / 5
Likes
16
Downloads
87
Makes
0
Views
770
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

This is a remix of the Belt Guide for Belt Tensioner (Sparco) by darumble (https://www.thingiverse.com/thing:4944378). This will allow the belt guide rollers to be mounted to 40mm aluminum extrusion for belt tensioners used in sim racing and flight simulators. The 45 degree angle was utilized to provide a wide range of clearance options depending on the placement of the belt tensioner. Note: This design requires 110mm M8 bolts.

Additionally required:

2x M8x110 bolts

2x M8 nuts

4x 608zz - 8x22x7 ball bearings

8x M8x15 mounting bolts

8x M8 slot nuts

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

No

Supports: 

Yes

Resolution:

.2

Infill: 

15

Notes:

Print with a 15% infill to allow for breakage in case of safety failure of the belt tensioner.

 

 

 

Category: DIY

Tags