Customizeable Growler Cap with seal
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.31 – €0.38 net (excluding VAT)
For file: growlerCap_0.2mm_PLA_MK3S_21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.34 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 21.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Lost you gallon jug cap? Print a new one!
- Rating
- 4 / 5
- Likes
- 5
- Downloads
- 67
- Makes
- 1
- Views
- 343
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
trg3dp published a SCAD file to create custom caps for beer growlers and gallon size jugs. I printed one of trg3dp's caps and found it could not seal fluids into the jug. I stated with trg3dp's scad file and provided further customization. You may now enter a different height and inside and outside diameters.
My SCAD file modifications additionally produces a seal insert to put inside the cap. If you wish a fluid seal on the cap print the insert in FLEX and pop it into the PLA printed cap.
Once you have you STL file, click split into objects. You will get the cap separated from the seal. Hide the seal and slice the cap for PLA. Then hide the cap and enable the seal and slice in FLEX.