8020 Dowel Rod Hangers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print two of these and use a 3/8" dowel or piece of tube to hang wire.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
These 8020 Dowel Rod Hangers are used to hang wire for organization and dispensing.
Hardware Required:
1 x 3/8" or ½" Tubing or Dowel Rod
Print BOM:
2 x 8020 Dowel Rod Hangers of the same size as your extrusions
Print Parameters:
Material: PLA, PETG, ABS, etc.
Recommended Settings: 0.4 mm Nozzle, 0.2 mm Slice Height, 5 Bottom, Top and External Perimeters, 15% or greater infill.
Secondary Settings: 0.6 mm Nozzle, 0.3 mm Slice Height, 5 Bottom, Top, and External Perimeters, 15% or greater infill.
I have successfully printed these files using both of the recommended settings.
Supports: None
If you print in the below orientation there should be no need for supports.
