Display Case (IKEA based)

A display case based on IKEA wall shelf.

The handles and stoppers have magnets inlayed. This allows for a clean closing mechanism.

What to print:

• 4x2018_Display-Case_Bracket_V1.0

Used to secure side glas.

• 4x2018_Display-Case_Bracket-Hinge_V1.0 (2x mirrored)

Used to secure side glas and base for hinge of outer doors.

• 8x2018_Display-Case_Hinge_V1.0

Hinges in which the acrylic glas with the cut corner is glued in.

• 2x2018_Display-Case_Double-Bracket-Hinge_V1.0

Base of hinge in center of display case.

• 4x2018_Display-Case_Stopper_V1.0

Used to stop doors in closed position. Bottom parts have magnet inlay during print.

• 4x2018_Display-Case_Handle_V1.1

Handle with magnet inlay during print. is glued to acrylic glas with double sided tape. Can be printed with fuzzy skin (Cura setting) to get a nice grippy surface.

Installation is a bit tricky. The shelfs have to be aligned perfectly to fit nicely. All brackets are glued onto the shelfs with double sided tape. Acrylic glass is glued with a fast curing plastic adhesive.

Hardware:

• IKEA Wall Shelf LACK:

https://www.ikea.com/ch/en/catalog/products/90282180/

• Magnets:

https://www.amazon.de/gp/product/B00TACKN4M/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

• Acrylic Glas:

Can be bought in every hardware store. they can also cut the glas into the desired shape as shown in the technical drawings.

Print Settings

Printer Brand:

Anycubic

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Filament: Das Filament PETG White

Category: Organization