Desiccant Jar (Fast Vase Mode)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jar with vented sides for filament drying desiccant beads. Fast print using spiral vase mode.
- Rating
- 4.6 / 5
- Likes
- 97
- Downloads
- 541
- Makes
- 13
- Views
- 2,545
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a remixed version of my Part Jars with vented sides for holding desiccant beads to dry filament. The 54mm diameter x 52mm tall container should fit inside most spool holders.
The container and lid print fast using spiral vase mode. The side vent design was derived from this video: Hacking Vase Mode - 3D Printing Experiments
There are two versions of the container, with or without bottom vents. The lid is vented but a solid lid version is available here.
The bottom layer vents are recessed 0.6mm assuming a 0.2mm layer height with 3 bottom layers.
Print Settings:
- Material: PLA
- Nozzle: 0.4mm
- Layer Height: 0.2mm
- Line Width: 0.5mm <== Important
- Perimeters: 1
- Bottom Layers: 3
- Infill: None
- Supports: None
- Bed Adhesion: Skirt
- Spiral Vase: Enabled (Prusa Slicer setting)
- Spiralize Outer Contour: Enabled (Cura setting)
- Smooth Spiralized Contours: Disabled (Cura setting)
- Printing Orientation: Jars bottom-side down, Lids top-side down