Center Spot finder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makes centering the mirror easier for collimation process, using reinforcement labels.
- Rating
- 5 / 5
- Likes
- 104
- Downloads
- 1,105
- Makes
- 25
- Views
- 4,083
- Reviews
- 21
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you're like me and not got steady hands, this will make centering the mirror without the use of guides which require steady hands a breeze. And all it takes is about a minute.
The inner printed side facing the mirror (no need for outer circumference) needs sellotape pressed (stops scratching mirror surface) and trimmed with a very sharp implement like a scalpel, these can be purchased cheap. The outer perimeter will fit snug around the glass, so if there's a beveled edge, it will still find center.
Reinforcement labels I used were Avery 6755.
PLA+ was used with a .3 nozzle , layer height of .16. Takes about 30 minutes at 40mm/s
.4 nozzle might work but have not printed