1 / 1
85mm Bottle Holder for 3x3 5/8" Power Rack — image 1

85mm Bottle Holder for 3x3 5/8" Power Rack

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€12.19 – €14.90 net (excluding VAT)

For file: CE3_giant cupholder.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €13.54 excluding VAT (range midpoint).

Weight reported by the author
160 g
Print time reported by the author
14 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Bottle holder for 3x3" power racks with 5/8" pins.

Rating
0 / 5
Likes
13
Downloads
149
Makes
0
Views
1,015
Reviews
0

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution — Noncommercial

Bottle holder for 3x3" power racks with 5/8" pins. Designed to hold an 85mm 1L CamelBak insulated Eddy+.

Must be printed with some kind of support for the pin. I used the Tree support in Cura, but others should work as long as the pin is supported.

Printed in PLA at 20% infill. Works okay but the parts that wrap around the post might be a bit thin at .125" - it works, but it flexes a little with a full water bottle. You might want to consider bumping it up to .2-.25" and printing with a higher infill.