Simple Parametric Kashakas Shell
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
First (sensible) try at a half shell for these shakers. You'll need to print a minimum of four to make a single set;…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
First (sensible) try at a half shell for these shakers. You'll need to print a minimum of four to make a single set; eight shells makes a two-hand set.
These are sized for quite small hands and for narrow (~ 5 mm braided black dacron) rope. Please adjust accordingly.
You probably want to print this with a non-brittle filament at close to 100% fill. You must use support.
Toasted barley might make a good filling. Glue the halves together, thread the string through and make it long enough that you can swing the shakers round the back of your hand.
And no, I can't do this, either. Link via MeFi.
Category: Music