Simple Parametric Kashakas Shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First (sensible) try at a half shell for these shakers. You'll need to print a minimum of four to make a single set;…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
First (sensible) try at a half shell for these shakers. You'll need to print a minimum of four to make a single set; eight shells makes a two-hand set.
These are sized for quite small hands and for narrow (~ 5 mm braided black dacron) rope. Please adjust accordingly.
You probably want to print this with a non-brittle filament at close to 100% fill. You must use support.
Toasted barley might make a good filling. Glue the halves together, thread the string through and make it long enough that you can swing the shakers round the back of your hand.
And no, I can't do this, either. Link via MeFi.
Category: Music