Exercise Bike Timer Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Our very basic exercise bike has no timer, so this is a simple clamp to hold a kitchen timer. The clamp is secured…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Our very basic exercise bike has no timer, so this is a simple clamp to hold a kitchen timer. The clamp is secured with a VELCRO® brand One-Wrap® thin cable tie.
As designed, the clamp fits around a ~36 mm diameter foam-covered bar. The timer used has a chunky clamp which means the holder needs a lot of clearance to fit through. Consequently, it's a bit loose but won't fall out.
VELCRO® and One-Wrap® are registered trademarks of Velcro BVBA.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2 mm
Infill:
20 %
Filament: eSun PLA+ n/a
Notes:
You probably don't need a raft, but you might want a brim to help with adhesion.
You*definitely* need supports with this design, but check in your slicer before printing to ensure that there's no support in the channel for the cable tie. Any support here will be**really** hard to remove. For me, using Cura, I found that increasing the*Support X/Y Distance* slightly (from 0.7 to 1.0 mm) made the problem go away.See the bar clamp support image for details.
Category: Sport & Outdoors