PVC fort pieces
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My kids kept breaking the original 5-way, so this one has a tiny bit of extra support on the middle joints.…
- Rating
- 0 / 5
- Likes
- 44
- Downloads
- 124
- Makes
- 1
- Views
- 1,301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial
My kids kept breaking the original 5-way, so this one has a tiny bit of extra support on the middle joints. https://www.tinkercad.com/things/7dXLcn51Gjq-pvc-5-way
There is also a modified version of the sheet clip that can plug onto a pipe. https://www.tinkercad.com/things/b4y0bZvspP5-pvc-side-clip
The 4-way roof topper can connect 4 2-foot pipes together so that it can rest on top of a 2-foot by 2-foot square. https://www.tinkercad.com/things/covRruqC6m8-pvc-fort-roof-topper
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40% Octet
Filament: generic PLA white
Notes:
I have to print all the connectors at 98% to fit the PVC that I got from Home Depot. It would be a good idea to do some quick ones first to figure out which scale fits the pipe. The final pieces are going to need 40% with a strong infill pattern and 1.2mm outer wall.
Category: Construction Toys