Photo Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A C-clamp with three cold shoes for mounting photo/video accessories like lights and strobes
- Rating
- 4.905 / 5
- Likes
- 653
- Downloads
- 2,434
- Makes
- 25
- Views
- 12,359
- Reviews
- 21
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
My version of Prusa's PETG Prusament Clamp with three cold shoes (old school camera flash mount made of non conductive materials). Provides convenient mounting points for lights, flashes and other photo accessories.
Design
The “design” is a copy of the Prusament Clamp done in Fusion 360. F3D file is provided.
Printing
No supports needed. Print orientations are set in the 3MF file. 0.4mm nozzle, 0.2mm layer height, 4 vertical perimeters, 25% gyroid infill. I'd recommend a good PETG that will give you plenty of layer adhesion.
Updated!
I've smoothed out the handle a bit and also rounded over the threads on the screw. The new version can be printed with a 0.6mm nozzle at 0.3mm layer height. Print time drops to just less than three and a half hours.
Note
Keep in mind this is plastic clamp you're printing on your FDM printer. Don't use it to mount your Hasselblad with a 5 kg lens on it. Don't use it to mount something where a failure could injure someone! If you need something more secure look at any of the excellent clamps by Avenger, Manfrotto, Impact or any number of others.