1 / 2
Permanent connection (Festanschluss) Oase InScenio 230 — image 1
1 / 2

Permanent connection (Festanschluss) Oase InScenio 230

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter to connect/terminate cables permanently on a Oase InScenio 230 outdoor power outlet.

Rating
0 / 5
Likes
0
Downloads
9
Makes
0
Views
538
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I created this model to replace the power socket on an Oase InScenio 230 with a permanent connection instead of an extension cord.

Main reason was, that I have several of these in serial, all connected to a 5x2.5mm² line and I wanted to be able to control the 4 sockets per outlet independently. 

By using the 5-wire cable, I can connect the individual sockets to three different groups and switch them via KNX relays in my garage.

  • Dimensions are for 5x2.5mm² underground cable (Erdkabel). Tight fit, you might have to cut a small bevel into the edge of the isolation of the cable for easier insertion.
  • The two-hole version is for looping the connection through to a next one in line
  • The one-hole version is for the last outlet in the line
  • Only use if you know what you are doing and/or let have it installed by a professional. 
  • So far, I have not found a way to remove the pre-installed plug without destroying it. Just open the outlet and cut off the retaining ring-clip-thingy.

 

(German)

Ich habe diese einfachen Teile konstruiert, um Oase InScenio 230 Außenverteiler fest an eine 5-adrige Leitung anzuschließen, anstatt über ein Verlängerungskabel.

Der Hauptgrund dafür war, dass ich mehrere davon in Reihe anschließen wollte und die Dosen in den Verteilern einzeln schalten wollte.

Mit einem 5-adrigen Erdkabel kann man die je 4 Dosen pro Verteiler auf 3 verschiedene Gruppen aufteilen. 

  • Die Öffnungen sind für 5x2.5mm² Erdkabel ausgelegt. Ggf. muss die Isolation etwas schräg angeschnitten werden damit das Kabel sich einführen lässt. 
  • Die 2-Loch Version ist zum Durchschleifen des Kabels an einen weiteren Verteiler gedacht. 
  • Die 1-Loch Version ist für den letzten Verteiler in der Reihe, bzw. einzelne Verteiler gedacht. 
  • Bitte nur einbauen, wenn ihr wirklich wisst was ihr da tut. Ansonsten bitte von einem Fachmann anschließen lassen!
  • Ich habe bisher keine Möglichkeit gefunden, den vorinstallierten Stecker am Verteiler zerstörungsfrei zu entfernen. Man muss den Verteiler öffnen und den umlaufenden “Clip” abschneiden.

 

Tags