Simple Sink Caddy
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.30 – €10.14 net (excluding VAT)
For file: Sink Caddy Prusa_0.2mm_PLA_MINI_10h17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.22 excluding VAT (range midpoint).
- Weight reported by the author
- 93 g
- Print time reported by the author
- 10.29 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A pair of suction cups hold this 16x9x4cm caddy in place. Enough room for a couple of sponges, drain cover, and scrubber
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 131
- Makes
- 3
- Views
- 1,253
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Too many sponges, scrubbers, and the like were cluttering the counter so I took a crack at designing a simple caddy for the kitchen.
The hanging holes are made for some suction cups I had lying around with 2mm long, 5mm stem (These with hook removed - https://www.lowes.com/pd/Hillman-Clear-Suction-Cup/1000037815).
Modeled in Blender.
Cheers!