Dual Filament Spool Holder With Guide For 2020 Profile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After I convert to Direct Drive I need a dual filament spool holder so I made one for 2020 or 2040 profiles.
- Rating
- 4.941 / 5
- Likes
- 200
- Downloads
- 1,136
- Makes
- 20
- Views
- 4,776
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After you convert to Direct Drive you probably need a new spool holder. So I made a dual spools holder for Ender 3 family (Ender 3, Ender 3 Pro, Ender 3 V2) or any 2020, 2040 profile like Prusa Bear. I modeled the holder myself and I borrow the filament guide from JCOENG.
BOM: 2 x M5x12mm socket head cap screw + 2 T-Nuts (M4x12 screws will probably work also)
Print orientation should be like this without any supports. Perimeters: min 4, infill: min 25%.
You can use a zip tie to secure the filament guide if your material is too elastic.
UPDATES
02.03.2023 add a new filament guide in an upper position. Useful if you print model higher then 200mm.
