Phone stand with reversible charge cable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A phone stand for both Android and iPhone (Tablets should work, but might be a bit wobbly!
- Rating
- 4.4 / 5
- Likes
- 95
- Downloads
- 1,060
- Makes
- 4
- Views
- 3,157
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
A phone stand for both Android and iPhone (Tablets should work, but might be a bit wobbly!), that has an integrated slot under the phone for a charging cable.
You can reverse the positioning of the cable so that it is the correct orientation for your device (Android micro USB users).
The hole for the cable is a little larger than a typical cable. I have tried a few and it fitted, but if yours does not fit you could either sand/file down the inside, edit the attached SolidWorks model for your specific cable, or use something like a soldering iron to slightly (and carefully!) enlarge the hole.
Print instructions
Category: Mobile Phone Print Settings
Printer: Craftbot Plus
Rafts: No
Supports: Yes
Resolution: 0.3mm
Infill: 25%
Notes:
REMEMBER TO ROTATE ON ITS SIDE
So that it doesn't need to use loads of support.
How I Designed This
SolidWorks Design
Uploaded is the SolidWorks model I created for this object. Within it you should be able to see the steps I took to create this model.