1 / 1
Icarus 2 Bearing Test Prints
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A set of test prints for each Icarus 2 carriage designed by Humebeam.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 53
- Makes
- 0
- Views
- 529
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Check if your bearings fit the Icarus 2 carriage before committing to a full print. All models are labeled with either normal/wide/narrow, so it should be easy to compare.
Print Settings (as recommended by Humebeam)
0.4mm nozzle
0.2mm layer height
5 top/bottom and perimeter layers
infill at least 25%
Print all parts in 0.2 mm layer height using a 0.4 mm nozzle. I recommend using 5 top, bottom and perimeter layers with an infill of 25% or higher.
Cover Photo Details:
Model: icarus-2.1-LMUW8-normal
Filament: Priline PC-CF