1 / 4
Öhlins Suspension - Large Adjuster Knob
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reaching the adjustment setting when the car is on the ground can be tricky and the adjuster can be a bit hard to turn…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 414
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Reaching the adjustment setting when the car is on the ground can be tricky and the adjuster can be a bit hard to turn if you reach it with an odd angle with your hand. So I made this larger knob that gives you a bit of leverage.
Just slide it on, it should stay in place by press fit on the rubber seal on the damper. But you can of course add a small drop of glue to make sure it stays in place.
Consider printing it with some slightly heat resistant filament.
Category: Automotive