1 / 2
Armrest Toyota GR Yaris
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Put padding on top of the sliding armrest and cover with leather or fabric. 2pcs M6 x 40 (max 50) for the hinge 4pcs…
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 153
- Makes
- 0
- Views
- 2,418
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Put padding on top of the sliding armrest and cover with leather or fabric.
- 2pcs M6 x 40 (max 50) for the hinge
- 4pcs M4 x 40 for the sliding piece
- 4pcs 5,3 x 20 washers for the screws holding the sliding piece
- Outer walls/perimeters: at least 3
- Layer height: 0.3mm (it takes a looooot of hours to print all parts even at that height)
- Infill: 15-20% works fine
- No supports
https://www.youtube.com/playlist?list=PLyJjY3xL9fgz-PqQDJ7FIqQcfAfLj0LqI
https://gr-yaris.co.uk/forum/threads/howto-3d-print-your-own-armrest.551/
Category: Automotive