1 / 2
Gumotex Seawave Cockpit Reinforcement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For transporting stuff on the deck.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 25
- Makes
- 0
- Views
- 662
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
For transporting more stuff on the deck I created these updates for the cockpit reinforcement.
The original reinforcements need to be drilled.
You'll need these materials:
2x Aluminium Tube 480mm long, outer diameter: 25mm, Inner diameter: 23mm
8x Screw DIN912 M3x14 (for securing the nuts)
4x Nut M4
4x Screw DIN 912 M4x65 (for screwing to the original reinforcements)
4x Washers, diameter: 8mm
All screws should be stainless steel.
Printed in PETG, 50% infill.
Glue together with CA Glue.