1 / 3
Rod holder / Bungee cord attachment for roof of Vw Golf Variant Mk VI — image 1
1 / 3

Rod holder / Bungee cord attachment for roof of Vw Golf Variant Mk VI

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Needed a attachment for some bungee cords so I could transport my fishing rods.

Rating
0 / 5
Likes
1
Downloads
18
Makes
0
Views
422
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

Tried goggling what the attachment points are called in the roof of the car without luck. So I do not know if they fit other models of VW. Behind the slidy thingy the main hole is 20mm and the groove is 10mm.

Printed with normal settings at 0.2 layer height with supports. I used ASA filament with 20% Gyroid infill.

to fasten it in place you need M10x30 bolt (I used stainless). I cut a slot to the end of the threaded part with a 1mm death wheel disc (picture), you can use manual steel saw, dremel or anything you have that can make a slot in the bolt. With this slot I can use a flathead to tighten the attachment to the car. The bolt needs to be roughly half way down the hole and put it in almost upside down and then rotate it into place and then tighten.

The bungee cord I used is a Quickloader Butterfly with adjustable length but you can use any that has at least a 24mm (inner) hook.

Tags