Raspberry Pi Zero Camera Mount/Gimbal
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts a Raspberry Pi Zero (or W) and a camera, positions in three axes and stands on its base or mounts to a wall.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 202
- Makes
- 2
- Views
- 2,281
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
This three-axis gimbal allows you to mount a Raspberry Pi Zero or Zero W and two types of camera boards, provides three axes of adjustment and stands on its base or the base can be mounted to a wall.
Hardware needed:
- 3x M3 nuts
- 1x M3x10mm screw for the PCB support plate
- 2x M3x12mm screws for the other two axes (because they are thicker)
- (Optional) ¼-inch x 20 (¼-20) nut for base
- (Optional) #6 or #8 drywall screws
I cut some foam rubber non-slip drawer liner mat to fit between the joints. This creates a friction fit which allows the three axes to be adjusted but also stay in place over time.
I am using two different camera modules with this mount. The plate supporting the Raspberry Pi also has holes for accepting both of these camera modules.
- https://www.amazon.com/gp/product/B073HYJDCM/ MakerFocus Raspberry Pi Zero Camera Night Vision Camera Adjustable-Focus Module 5MP OV5647 Webcam Video 1080p Compatible with Raspberry Zero W
- https://www.amazon.com/gp/product/B07R4JH2ZV/ Longruner for Raspberry pi Camera Day & Night Vision, IR-Cut Video Camera 1080p HD Webcam 5MP OV5647 Sensor for Raspberry Pi RPi 4 3 B B+ 2B 3A+ 2 1 Camera
Finally, there are some brackets on the edge of the PCB support plate for future cover designs.