Shapeoko mount for NEJE laser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount for the NEJE lasers that uses M5x8 and M3x8 mounting screws on a Shapeoko CNC.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 324
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This laser mount is fairly sturdy but easy to install and does not require removing the router/spindle.
Printing
No supports are needed.
Infill and perimeters can be increased from defaults, but likely not needed unless you are really pushing high speeds.
I printed mine using 0.3mm layer height and 0.6mm nozzle, but any layer height should work fine.
Parts
1- M5x8 screw (M5x10 might also work)
1- M3x8 screw (M3x10 might also work)
Assembly
Install NEJE laser mount by using the M5 and M3 screws.
Remove the front M5 screws from the front of the Shapeoko mount and re-use to install bracket on CNC.