EIBOS Cyclopes PTFE adapter plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows for a 10mm ptfe connector to be mounted on the top of the Cyclopes enclosure.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 106
- Makes
- 4
- Views
- 932
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
The adapter plate allows for top mounting the ptfe connectors to the EIBOS Cyclopes to manage filament path. The design has three posts on the lower plate that have a snug fit diameter that can just press fit into the upper plate. Middle M3 screw secures it even more. Note if you break off the center post on the lower plate it can be used on the front of the enclosure.
Requires:
[ ] 2x 10mm ptfe connectors. 6mm OD x 4mm ID ptfe tube shown in photos. Prefer the larger tubing as it's easier for the extruder to pull the filament.
[ ] 1x M3*12mm Hex Socket Head Cap Screw
Printed with 3DXTech 3DXMAX ASA, 50% infill