Grommet & Spacer for 6-32 UNC x 6 ("Computer Case Screw")
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grommet and 2mm Spacer for 5-32 UNC x 6mm screws. That's the weird hexagon-shaped screw with a "built-in" washer,…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 62
- Makes
- 0
- Views
- 744
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Grommet and 2mm Spacer for 5-32 UNC x 6mm screws.
That's the weird hexagon-shaped screw with a "built-in" washer, which are commonly used when mounting PC case panels, floppy drives, hard drives, CD-ROM-drives and so on. Although a 6mm depth shouldn't really be used, it's nevertheless common to see in the wild.
In my case, I needed a 2mm spacer and grommet to attach SCSI drives in a Sun SPARCstation 10, which uses quite an esotric design to mount the drives. The service manual mentions a special mounting plate, but I didn't see the point, and made these replacement parts instead.
I printed these with Fillamentum Flexfill 98A so that they fill the original purpose: vibration dampening.
I'm guessing nobody will need these parts for the same reason as I did, but they may nevertheless be useful for others; at least for remixes.
Included:
- Blender project file
- STL for one spacer
- STL for one grommet
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Filament: Fillamentum Flexfill 98A Blue
Notes:
- Reduced the first layer extrusion width to 0.4mm in PrusaSlicer to avoid some warping Reduced vertical shell perimiters to 1 as this is a tiny print
Category: Replacement Parts