1 / 7
Print In Place & Cut:   Hybrid Folding Phone Stand — image 1
1 / 7

Print In Place & Cut: Hybrid Folding Phone Stand

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Inspired by this print in place folding phone stand: https://www.printables.com/model/94882-folding-phone-stand

Rating
5 / 5
Likes
3
Downloads
39
Makes
1
Views
562
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Inspired and based on this print in place folding phone stand :

https://www.printables.com/model/94882-folding-phone-stand

I decided to make it half 3D printed and half CNC cut.
I have attched center hinge as well as the stand folding arm as both STL and DXF. i made mine from transparent acrylic and it came out looking great.


Long arms for tablets

Short arms for phones
 

Note: 
I like Acrylic but you can use whatever material suits your needs and/or liking as long as its thickness corresponds to the thickness of the hinge which is 4mm .

=====================

UPDATE: 

I have redesigned the hinge fro scratch and now it works much better. I printed it using PLA+ @ 0.14 layer height  and progressive speed up to 50mms with 100% part cooling. after print cools down you would have to apply a bit of a force to loosen the hinge as it welds just enough to have zero wobble during openning and closing of the legs - works great.
 

Enjoy.
====================

Using 40W CO2 laser it should take for both legs: 

With Hexagons: ~4 min.
Without Hexagons: Less than 1 min.

Used a common PVC clear adhesive to glue the legs to the hinge.
 

Tags