Print In Place & Cut: Hybrid Folding Phone Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by this print in place folding phone stand: https://www.printables.com/model/94882-folding-phone-stand
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 562
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired and based on this print in place folding phone stand :
https://www.printables.com/model/94882-folding-phone-stand
I decided to make it half 3D printed and half CNC cut.
I have attched center hinge as well as the stand folding arm as both STL and DXF. i made mine from transparent acrylic and it came out looking great.
Long arms for tablets
Short arms for phones
Note:
I like Acrylic but you can use whatever material suits your needs and/or liking as long as its thickness corresponds to the thickness of the hinge which is 4mm .
=====================
UPDATE:
I have redesigned the hinge fro scratch and now it works much better. I printed it using PLA+ @ 0.14 layer height and progressive speed up to 50mms with 100% part cooling. after print cools down you would have to apply a bit of a force to loosen the hinge as it welds just enough to have zero wobble during openning and closing of the legs - works great.
Enjoy.
====================
Using 40W CO2 laser it should take for both legs:
With Hexagons: ~4 min.
Without Hexagons: Less than 1 min.
Used a common PVC clear adhesive to glue the legs to the hinge.