Dremel Wrench Handle
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.35 – €0.43 net (excluding VAT)
For file: dremel_wrench_handle_0.2mm_PETG_MINI_32m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.39 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 31.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Small handle for the Dremel wrench of the Dremel 3000 kit (might work for other kits as well).
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 130
- Makes
- 3
- Views
- 576
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I kept poking my hand with the screw side of the Dremel wrench, so I decided to create a small handle for it.
Printed in Prusament PETG Jet Black.
Prints in about 30 minutes with Prusa Slicer default settings for the 0.20mm QUALITY profile.
Best printed with the opening towards the print bed, so the rounded corners can get printed nicely.
BEWARE: because of the tight fit, you will not be able to remove the wrench from the handle anymore. You might need to carefully hammer the wrench into the handle because of tolerances.