Replace Dog Collar Housing for Extreme Pro Dog Fence System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a new housing to hold the electronics of a electric dog collar made for the Extreme Pro Dog Fence System.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Public Domain
You'll need a couple threaded inserts that match the shock prongs. You can reuse the original plastic slip piece that mounts the housing to the collar, you'll just need to open the holes a little bit (I used a dremel but a drill bit or sharp knife could do it). You could also use some threaded inserts to connect the lid to the bottom or just use a correctly sized screw.
There is a channel for a rubber belt to be pressed into which should help keep water out. A bead of silicone would work just as well.
I printed in ABS and then bathed the parts on acetone to smooth and also add water protection.