GoPro tripod mount with printed threads
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix with printed 1/4"-20 UNC thread for the tripod and a M5x0.8 for the GoPro bolt/screw.
- Rating
- 4.8 / 5
- Likes
- 98
- Downloads
- 1,218
- Makes
- 5
- Views
- 2,404
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
Thanks a lot to @Noname_Engineer for that great GoPro tripod model.
I was too lazy to go out to a hardware store and buy thread parts. And I also needed a trippod mount very quickly (stores were closed).
Because of that I just added the necessary M5x0.8 and 1/4"-20 UNC thread to the model.
M5 is normally used on all GoPro screws/bolts and the 1/4"-20 UNC thread is a standardised thread for tripods.
You'll find the editable Fusion 360 file as well as the STL and GCODE file.
- 20% infill
- 0.15mm quality print
- PETG used
- printed without supports
-----------------
Vielen Dank an @Noname_Engineer für das tolle GoPro-Stativmodell.
Ich war zu faul, in einen Baumarkt zu gehen und Gewindeteile zu kaufen. Ausserdem brauchte ich sofort eine Stativhalterung (die Geschäfte waren geschlossen).
Aus diesem Grund habe ich das Modell einfach mit dem notwendigen M5x0,8 und 1/4"-20 UNC-Gewinde versehen.
M5 wird normalerweise bei allen GoPro-Schrauben verwendet und das 1/4"-20 UNC-Gewinde ist ein standardisiertes Gewinde für Stative.
Ich stelle hiermit die editierbare Fusion 360-Datei sowie die STL- und GCODE-Datei zur Verfügung.
- 20% Infill
- 0.15mm Druckqualität
- PETG verwendet
- ohne Support gedruckt