1 / 2
Lens Cap 49mmØ
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Useble for 49mmØ lenses. This lens cap has a good grip on the lens, is easy to assemble and print.
- Rating
- 4.2 / 5
- Likes
- 44
- Downloads
- 332
- Makes
- 9
- Views
- 1,542
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Hey there :)
Step 1: Load the files into the slicer
- Or you use the prepared gcode, just look at the requirements
Step 2: Correct the orientation of the models:
- The FRAME is printed with the Logo facing down and the bridging should be from top to bottom ( I printed it with no supports)
- The L-R BAR is printed 2x with supports and support-blockers over the grooves!
- The SPRING is printed just flat and with no supports
Step 3: Slice
- Add supports if you haven't yet
- 0.2mm Layerhight (0.4mm nozzle)
- 15% Infill (Gyroid)
- PETG preferred
- Bridging-angle is changed to 10 degrees (try it but you don't have to)
Step 4: Assembly
- Remove all supports
- insert the bars into the frame and now the spring into the grooves of the bars
- Depending on the filament, you may have to manipulate the BARs for optimal fit
Happy end