Mini Hygrometer Thermometer Angled Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are to hold your digital hygrometer/thermometer at an angle so you can read it. Three angles are available.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 48
- Makes
- 2
- Views
- 311
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried to print this stand from alarmba but it did not fit the cheap Chinese mini hygrometer thermometers I picked up on Amazon (USA), but the hole was too small. So I created these.
The hole in these stands is 25.5mm x 45 mm.
The angles are vertical, 22.5 degree backwards lean, and 45 degree backwards lean. The fit is snug and the parts are of minimal thickness so be careful when fitting it in. The walls are only 1 mm tick which is enough for this purpose and uses minimal material.
I printed the 45 degree one in PLA without issue. I haven't printed the other two.