T-block puzzle brain teaser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I used to have something like this when I was a kid. Aim is to build a cube using 54 T-blocks. Print in different…
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 75
- Makes
- 0
- Views
- 485
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial
I used to have something like this when I was a kid. Aim is to build a cube using 54 T-blocks.
Print in different colors as you like or even try making 2 colored blocks - switched filament during print - looks neat, and you can get nice results when your done.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
10%
Filament:
random PLA (blocks) PETG (housing)
Notes:
Print 1 block first - check for issues such as elephant foot and dimensions - part is 8mm thick, 24mm long and 16mm in height - if deviation is more than +/- 0,1mm check printer settings. In CURA try changing horizontal expansion or initial layer horizontal expansion. There is a lot of blocks that are close to one another, so small deviations may cause whole thing unstable and just ugly.
AlsoCheck in the slicer if the block stands perfectly flat - had some problems - in tinkercad model is flat, but in CURA there was just tiny bit rotated (managed to print though).
Category: Puzzles