Counting matching models…
A thread test block for normal Metric threads. You can see if your printer is capable of printing threads. If the threads are good, you can use it later as bolt measuring tool too. The v2 version uses a thicker marking to be more printable.
A thread test block for coarse imperial threads (UNC). You can see if your printer is capable of printing threads. If the threads are good, you can use it later as bolt measuring tool too. I've also made a Metric version for this model:…
BiQu H2 fanduct for a single 5015 fan Parts Needed: 2x M2.5 x 6 countersunk screws 2x M3 Nuts 2x M3 x 24 screws Printsettings: Layerhight: < 0.15mm Support Needed BiQu H2 fanduct for a Dual 5015 fan Parts Needed: 2x M2.5 x 6 countersunk…
Alternative zum herkömmlichen Start. Hier können die kleinen einfach die Kugeln rein werfen und schon gehts los. Super schnell hintereinander. Damit ist richtig was los auf der Bahn. (am Besten ohne Hammer und ohne Wippe ;-)) Kann auch…
I noticed that the wrench with chamfers is very close to fitting IBnobodys heatblock clamp so i remoxed the STL to make
E3D socks will fit the mini and worked well for me, but there is some noise in the community about how stable they are. I wanted my own. If you're based in the UK and would like one of my prototype moulds or socks, private message me.…
A tool to check if your printer is capable to print metric thread. This is a remix of https://www.printables.com/model/738513-metric-thread-testblock Thanks to the original uploader.
XLR Durst Cap / Portblocker I Printed it in Extrudr Semisoft TPU Repost original: XLR cap by vitalyu - Thingiverse
Part cooling fan for biqu h2 v2s that have bigger air outlets. Use 2x heat set inserts to mount the fan.
This is a customizable rack for PB Swiss Tools BitBlock bit holders (PB C6 970) . You can customize the overall height and the number of BitBlocks. It's ideal for use in a foam board but can be used stand-alone as well. The BitBlocks hold…
This is a Bitblock holder for PAFEN / Kistenberg / Botle / Valle Verde Toolboards (Wallboards) which can be equiped with 4 of my own Bitblocks or PBSwissTools Bitblocks As an option i designed my own easy to print bitblock with no support…
This is a of The Logitech C920 Lightblock from https://www.printables.com/model/128843-logitech-c920-li As well https://www.printables.com/model/185917-logitech-c920-webcam-privacy-cover
This is an add-on to my game of Tic Tac Rocket . Now you can play tic-tac-toe in 3D: put your stars (crosses) and planets (circles) on top of the opponent's pieces, securely occupy cells with missiles, neutralize other people's moves. You…
TPU stabilizer silentblock for Nissan 200sx S13. 100% infill 6 perimeters wall
Made a mold to make your own silicone socks for the MP Select Mini V2 hotend like the E3D ones but to the proper measurements, this does not fit E3D hotends or colones, only the MPSM V2 stock hotend, the block measurements are…
Gridfinity Prusa MK4 Heatblock/Wrench Holder - holds 1 assembled Prusa MK4 heat block with nozzle, thermistor and heater along with the Prusa nozzle wrenches and 3 of the Allen wrenches included with the Prusa MK4. Bin size is 1x1x6…
Alternative to starter GRAVITRAX JUNIOR
Enables the nozzle to be changed without removing the part cooling duct and fan. Print instructions This is a clamp mechanism that fits round the X carriage and bearing rods of a Prusa i3 MK3S to hold the heatblock in position whilst the…
=================PLEASE LIKE AND SHARE============= Designed for the contest - it is just a simple novelty box in shape of famous E3D V6 Heatblock and Nozzle combo. The nozzle used for locking and unlocking the lid by turning 90º. See…
Drilling a hole in the "first" Stock nozzle will prevent from falling out. Use a 2.5mm drill and go (if possible) 6mm deep. If you go through it doesnt matter. I use 2.5x5mm Spring type straight pins to fasten the nozzle in the Block. The…
TPU silentblock for stabilizer bars. 100% infill 6 perimeters walls
Made this edit in fusion 360 to move the ducts 10mm lower to allow for use with volcano style heatblock. Included step file for customization Category: 3D Printer Parts
Chłodzenie dla drukarki Fan 4 Max Pro Anycubic z blokem V5
MK4 "Naked" Gyroid Dampers (TPU) - Anti-Vibration Feet Summary Sponge-like vibration dampers for the Prusa MK4 printed in TPU. Uses exposed Gyroid infill. Requires specific slicer settings (Vertical Shell Thickness OFF)! Description These…
I thought pyr0ball's mold design was simple and worked great as far as overall fit/finish and ease of use. However the socks it produced were about 1mm too long with the nozzle tightened down against the heat block. So I remixed it to…
Gridfinity base for the PB Swiss bitblock holder PB 990.Leer
Some test blocks to show how to use “fuzzy skin” settings to add texture to a part. Previously I created a small set of test blocks intend to to show a significant amount of “fuzzy skin” on the surface of a 3D print. As I noted then, the…
Einfacher Test zur Anpassung des Wischvolumens für saubere Farbwechsel ohne verwischen. Die Druckdateien wurden mit den Standardeinstellungen von 70mm³ beim Entladen und 70mm³ beim Laden der entsprechenden Filamente gesliced.
DIY Heatblock design for Volcano
TotBlocks are a series of building blocks which can be used to construct the crystal structures of micas, pyroxenes, amphiboles, and other clay minerals. Source code, documentation, and support can be found here:…
Dual 5015 fan duct for sv04 printer with volcano hotend. Really increases the cooling performance with out sacrificing on the idex extruder clearance/ copy & mirror print area. Should clear the volcano heat block, but you might want to…
UPDATE : (v1-2, 1 mar 2026) added a cutout for the heater housing on the printhead pcb: BOM : 2xM2 bolt 6mm 2xM2 nut 2xM3 bolt 4 or 6mm 3xZip Tie 2mm width Description : I made this mount for easy printhead removal, allowing the…
Intake for a Laserbox for blocking the light and letting the air in Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0,2 Infill: 20% Category: Parts
I made a 20mm wide custom heatblock out of copper for my E3D v6 and wanted a silicone sock for it. As the heatblock is custom I needed to design and mold the sock for it. There probably aren't many heatblocks out there that a sock out of…
EDIT: A remix of LazaroFilm's https://www.thingiverse.com/thing:2811140 I wanted a tighter fit and since there are no wires on the left side, I closed the U cutout. Fits fantastically on my Monoprice Select Mini v2 Q4of 2017 edition 3D…
I needed a small platform that can securely hold my CNC bits for easy access while swapping them out, but also small enough to fit into my tool tray along with the other Snapmaker tools. I didn't add a slot for the hex key as I store mine…
Modified Duct and base to mount HF hotends on Ender 3 & CR10 printer styles with Orbiter 1.5 extruder: - Volcano - Rapido HF - DragonACE (not tested) - DragonSF/HF (modded heatblock) - Dragonfly (modded heatblock) standard E3D V6 hotend…
Silentblock for Creality K series. Manufactured with Smartfill's TPU Flex 93A.Silentblock para las Creality serie K. Fabricado con TPU Flex 93A de Smartfill
A 3D scan using my Creality Sermoon S1, and a retroengineering to make a 3D model of the HT Hotend.
So i decided to print a nozzle out of ABS with a 0.15mm nozzle to push PLA through for kicks, set it first to 60c, then 100c while i kept pushing pla through it, set it to 120c, wiggled nozzle, noticed it was now literally wet spaget/as…
Shaved a mm off the inside to better clear the bearing. Moved the mounting holes out so they don't dead end under the bearing and can be used from the top or bottom, Removed the undercut under the assembly to make bottom flat, added a…
Esta pieza sustituye a OM 8098 POS 12 de Sportster 00-94 y creo que anteriores. Dado que estas piezas son difíciles de conseguir y muy caras para lo poco que son, he decidido hacerlas y evitar así que mi bocina produzca ruidos extraños.…
Addon to the anti-vibration dampers to use the IKEA screw connections and screws for my 3D printer housing. Here I chose IKEA Plasta 60*55*60 here is enough space for soundproofing, extendable filament holders and a Prusa Mini(+). "Under…
I mod Volcano horn cooling for Biqu H2 with Phaetus HF Heat block Category: 3D Printer Parts
My mount for H2 with microprobe and Phaetus HF Heat Block Category: 3D Printer Parts
If you put a PB bitblock in your pocket it tends to attack your private parts, this cover shields the pointed parts of the bits in the bitblock. Also usefull to shield the bits from other tools in a toolbag to avoid mutual damage or…
Damit die komplette frische Luft durch die Grafikkarten gedrückt wird habe ich diesen Outlet Blocker kreiert
Hemostats (to install without disassembling the gantry) Two M5x10 screws (adapter to gantry plate) Four M5x3 nuts (adapter to gantry plate and nut block to adapter) Two M5x16 screws (nut block to adapter) Two M5 lockwashers (goes under…
Um den Stoßdämpfer am Mofa am Rahmen zu befestigen wird ein "Silentblock" zwischen Stoßdämpfer und Rahmen im Auge des Stoßdämpfers eingesetzt. Dieses Teil ist das Gummistück, welches im Stoßdämpfer sitzt, in welches man die Buchse für die…
Engineering STEP model by WebCAE for analysis and visualization. AI-assisted CAD design. Model files are provided in STEP format under CC BY 4.0.
UPDATE : (v1-2, 1 mar 2026) added a cutout for the heater housing on the printhead pcb: BOM : 2xM2 bolt 6mm 2xM2 nut 2xM3 bolt 4 or 6mm 3xZip Tie 2mm width Description : I made this mount for easy printhead removal, allowing the…
MK4 "Naked" Gyroid Dampers (TPU) - Anti-Vibration Feet Summary Sponge-like vibration dampers for the Prusa MK4 printed in TPU. Uses exposed Gyroid infill. Requires specific slicer settings (Vertical Shell Thickness OFF)! Description These…
Hemostats (to install without disassembling the gantry) Two M5x10 screws (adapter to gantry plate) Four M5x3 nuts (adapter to gantry plate and nut block to adapter) Two M5x16 screws (nut block to adapter) Two M5 lockwashers (goes under…
This is a customizable rack for PB Swiss Tools BitBlock bit holders (PB C6 970) . You can customize the overall height and the number of BitBlocks. It's ideal for use in a foam board but can be used stand-alone as well. The BitBlocks hold…
Alternative zum herkömmlichen Start. Hier können die kleinen einfach die Kugeln rein werfen und schon gehts los. Super schnell hintereinander. Damit ist richtig was los auf der Bahn. (am Besten ohne Hammer und ohne Wippe ;-)) Kann auch…
This light-blocker is to be used with this interface, the -5mm version of the interface: https://www.thingiverse.com/thing:6277086 I have modified it with extended forehead-cap here, which you can use also:…
