1 / 5
SpaceX Starhopper sharpener
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Starship Hopper Model that can sharpen your pencils, or as the great leader of Kazakhstan would say, "Make it pointy"
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 43
- Makes
- 1
- Views
- 453
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Designed the Starhopper Sharpener to fit a simple (D=6-8mm) pencil in it and the prism sharper I had laying around.
I printed the middle & bottom part in two pieces to have access from underneath.
If you want to use a plug, there is an
- easy option: Print the middle part as support (or just print the plug) and use it as a simple plug
- difficult option: cut a thin strip of an flexible material. (I just cut a thin strip of an plastic bottle).
Then glue the plug to the one side of the strip an attach the other side of the strip to the sharpener. (Photos)
You might have to add some material to the top part if the sharpener hole doesn't align with the hole of the middle part (photos)
To attach the parts together I used superglue and 2sided tape since I didn't had a gluegun with me.
