Counting matching models…
All new designs! Three different heights, and three different bottom designs. Printed at 0.16mm layer height on my Bambu Lab P1P using PolyTerra Matte Charcoal Black: https://amzn.to/3F4Dv7d Heights: 15mm 18mm 21mm Bottom design: 45…
My new Bic Lighter Sleeves have an awesome tactile hand feel, give a satisfying POP when you remove the Bic, and I think they look bad ass! There's a fin inside to keep a good grip on your lighter while still allowing it to be easily…
Ø17.2mm outer diameter might need a bit of tweaking depending on your printer setup.
Simple remix od this model by mijo11 made by my girlfriends request. Just modified one end to make it really pointy so it can be easier applied. Print with high infill or many perimeters, just to fill it as much as possible to make it…
Pointy Haired Boss from the comic strip 'Dilbert' by Scott Adams. In the comic strip, the Pointy Haired boss provides a fountain of wisdom, which you need to avoid at all costs. No supports are required. If you have the right filament…
A not-so-small tweak to the Puppy 13 head by Tori. I took the STL file into Blender and gave it pointy ears. They're a bit assymetrical but, hey, this is my first time tweaking a digital model. All test prints were done successfully…
Was going for a “double dipped” pot look. The pot body consists of 3 different parts you can print with different colors/materials and assemble them; and an optional base to hold the pot straight up, though the pot looks nice just resting…
Update 6/5/23- I hopefully improved the tolerances so it should fit together better A collapsing Light up saber which will be interchangeable with all design versions I come up with This is the pointy version, It can be quite sharp Base…
MMU version of Pointy Haired boss Pointy Haired Boss from the comic strip 'Dilbert' by Scott Adams. In the comic strip, the Pointy Haired boss provides a fountain of wisdom, which you need to avoid at all costs. The model, as presented is…
This model is compatible with the lego system.
The robotic leg design is from my original character "PA-MF03 Komatsuna". Leg 3D model was done quite some time ago. I tried to make it 3D printable with the filament hinge method but no success, things turns out too loose and I can…
Print time: Small: 1h Normal: 2h 45min Big: 4h
Custom Stabby / Pointy Keycaps for Cherry Mx Profile (type of mechanical keyboards). A perfect gift or a prank for your coworker or family member. Includes 2 keycap designs: round type (curved) and flat type. Printing settings: Infill:…
I made this in PETG with 5 walls 15 percent infill. You still need the orginal rubber fitting.
Watch strap 22mm template for my leather project. With pointy tip.
Print the sheath at 102%. I've printed mine in PA12-CF and PA6-CF.
This remix keeps the overall shape (147 x 33 mm) of the original pocket comb but redesigns the teeth/tines . In the original model, each tine stays the same height as the outer frame all the way to the tip. In this version, the tines…
This is a onepiece version of the Pointy Haired Boss (PHB) based on my multi-part PHB model that I've previously posted. Since I do not have an SLA printer, I teamed up with maker Kyler Stern to do the printing and painting. I converted…
Made with precision, vertices have sharp corners, NO fillets, rounded corners or blends were used. Wanted to make a Dodecahedron Christmass star and it's ready for the next one! Print with some supports or without only if you are a badass…
More details and discussion on real solutions welcome at https://forum.v1e.com/t/lr3-mod-diverting-shaving-piles-avoid-excess-shavings-in-under-bearing-wheels-causing-inaccuracies/34020
flash hider for airsoft https://www.printables.com/model/578627-fgc-6-fgc-9-mkii-stingray-flash-hider-14mm-ccw-for
This is an old, generic percussive (thumping) back massager that came with a couple heads, a rounded one and a bumpy one, and my spouse requested a pointier version of the rounded head to target muscles better. I measured the threads on…
Just a fan work and a realization of an old dream I had when I was a kid to build a big 'ol army of spacefaring space nuns from 40kya in the future. These sisters love battle, that's for sure! Seemed like most of the Adepta ladies you can…
This model is compatible with the lego system.
My friend needed a support for his new GPU and the GPU Jack fit the bill perfectly. However, the heatsink cover of his GPU doesn't have a wide flat spot to contact the original GPU Jack. I reduced the contact point of the GPU Jack so it…
Fits well on the ender 3 pro and it should fit on most standard rotary encoders 0.2mm / 20% / supports touching bed happy making
Vase with a sharp pointy cornered pattern. Added a version with a flatter top
Universal knife block that can fit knifes up to a length of 13 cm (regular kitchen knives).
Detailed 3D printable Adorable Chibi Pink Axolotl Wearing Wizard Robe And Pointy Hat With Stars figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a…
Pointy hollow hexa-sphericon Giroid toy Exaesfericón hueco puntudo juguete Giroide
A sitting cat wearing a witch hat two sizes too big, printed as one piece. The ears poke through the brim, the hat tip flops over, and the whole thing sits flat without a stand. At 60 % scale it is 52.9 × 49.5 × 60.0 mm and about 24 g of…
Thjs is just a different base I designed for the double dipped pointy plant pot. It can be flipped and used either way
This is my "Bristle" inspired model from the paper mario TTYD game. Just like in-game, this guy has pointy sharp....points. And extendable spears on both sides. Two off set spikes on the bottom allow it to remain fairly upright. Designed…
My wife loves the original sewing weights from Scared_Bunny, however for creating and cutting sewing patterns, she needed weights that have a pointy end to keep the paper from rolling up. So I took the original design, recreated it and…
Detailed 3D printable Adorable Kawaii Ice Cream Cone Character Wearing Wizard Robe And Pointy Hat figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a…
Pointy Painting Mates grew out of my Stable Genius painting turntable . I liked the pyramid pins keeping models raised off the flat surface while painting, so I made standalone platters for people who already have a turntable or painting…
A little thing that makes it easier to hold a crappy Harbor Freight dental pick thingy when I'm painting tiny details (badly) with one. Easier and more comfy to hold than a toothpick. You might wanna increase support X-Y separation when…
This remix keeps the overall shape (147 x 33 mm) of the original pocket comb but redesigns the teeth/tines . In the original model, each tine stays the same height as the outer frame all the way to the tip. In this version, the tines…
WARNING DO NOT USE THIS IN AN ACTUAL NERF BATTLE OR SHOOT IT AT LIVING THINGS!. Might not fit in every nerf blaster.
Hi! I was in need of a very thin nozzel to clean a hard to reach spot through a tiny opening and needed better suction towards the underlying surface, so i created this one. This is my first self-made model ever, so it is not really…
I didn't like the other shower hooks because they don't have pointy heads. No supports are required, print on the side with brim enabled . It was printed successfully on PETG and PLA.
Should print fine right side up without supports. You may want to add sprews on the corners if you tend to have corners pulling away from the bed but for me they weren't necessary on my textured plate.
A small planter model containing 5 points. Care was taken to create a fairly strong planter, but one that uses minimal material. I recommend printing with at least 8% infill for good results. Measures about 3.5" wide and 2" tall.
Latest design in Tinkercad. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator (5th Generation) Rafts: Yes Supports: Yes Notes: Added supports using Meshmixer. Category: Earrings
I originally made this model at 127.3% scale, cause at that size it uses M4 hardware. This has been scaled back down to stock size, so let me know if there are fitment issues.
Pointy Hexagonal Crystal with 4 Stand Types: Includes: 1 Pointy Hexagonal crystal (stl file) 1 Circular Stand (stl file) 1 Hexagonal Stand (stl file) 1 Rectangular Stand (stl file) 1 Abstract Stand (stl file) The crystal itself may need…
Just put this on the end of any USB to prevent things from going in such as dirt, dust, ETC.
