1 / 4
Safety 1st Stair Gate Hold Open
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A way to hold open the Safety 1st Auto-closing Stair Gate
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 329
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Standard Digital File License
This was designed to be used on the Safety 1st Auto-closing Stair Gate for those times that you actually don't need it to be closed and what to hold it open.
Please keep in mind that once kids are around it is wise to remove it and get the gate closed again.
Printing instructions:
You want this part to be robust so here is what I recommend.
- 0.2mm Layer Height
- 3 Perimeters
- 25% Infill
- Print on the position below to avoid delamination between layers while using.
- Supports are only needed for the start of the top inner edge, after that is 45degrees overhang so your printer will manage without supports.
