Calibration Block with Countersunk Hole and Slot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Calibration Block with Countersunk Hole and Slot to catch problems with elements inside perimeter of object.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Calibration Block with Countersunk Hole and Slot to catch problems with elements inside perimeter of object.
Instructions
I took the 20mm block from Spacexula's calibration set and added a countersunk screw hole for a M3 socket-head screw, and a slot for a M3 nut to be able to check my bots ability to accuratly do inside holes and slots in an object.
Edit: (from algspd's comments below, I updated the object to use values that should produce a snug fit, the old values were the nominal diameters for an M3 socket-head screw)
The head diameter is 5.89mm and the shaft diameter is 3.06mm, this should produce a snug fit. I created this calibration block to test the accuracy of the inside diameter of a hole on a Printrbot Plus, from a SketchUp file.
Category: 3D Printing Tests